KINGBOLEN S6 OBD2 Scanner Professional Full System OBD2 Diagnostic Tool Car Scanner OBD PK ThinkTool thinkdiag old thinktool

including :Reset SAS,Reset BRAKE,Reset GEAR,Reset OIL,Reset IMMO,Reset INJEC,Reset TPMS, Reset BMS/BAT MATCH ,Reset BLEED,Reset ETS/ELEC.TH ROTTLE,Reset DPF,SUS Reset ,AFS Reset , Sun Roof ,GEARBOX LEARN ,EGR Adaption ,Language change , A/F, Coolant Bleed , Nox Sensor, Seats Calibration , Stop Start , Transport Mode , Tyre Rest ,Windows Calibration ,AdBlue Rest , ODO, AIRBIG … Powerful dealership level Functions can fully meet your needs

Please note: Not all reset features are supported on all model.

If you have any doubts, please send us your model, year and the reset function you want to know, and we will check it for you. Thank you.

1. SAS – Steering Angle Reset (Supports 44 Brands)

To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference, the ECU can calculate the accurate angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body, you must reset the steering angle.

2. Brake Reset (Supports 41 Brands)

lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.

3. Gear Learning (Supports 22 Brands )

The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped with Delphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336' gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car. After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, or crankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.

4. Oil Reset (Supports 53 Brands)

The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.

5. IMMO Service (Supports 46 Brands)

to prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel, ECu, BCM, or remote control battery is replaced, anti-theft key matching must be performed.

6. Injector Coding (Supports 47 Brands)

Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection.

7. TPMS Reset (Supports 39 Brands)

After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.

8. Battery Matching(Supports 33 Brands)

This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.

9. ABS Bleeding (Supports 34 Brands)

When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. lf the ABS computer, ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.

10. Elec.Throttle Adaption (Supports 37 Brands)

Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the ECU returns to the initial state. By doing these, the movement of the throttle (or idle motor) can be more accurately controlled, thus adjust the intake volume.

11. DPF Regeneration (Supports 39 Brands)

DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuouscombustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion) to stabilize the filter performance.

12. Suspension Matching (Supports 14 Brands)

This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.

13. AFS Reset (Supports 21 Brands)

This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.

14. Sunroof Initialization (Supports 4 Brands)

This function can set the sunroof lock off, closed when it rains, sliding/tilting sunroof memory function,temperature threshold outside the car etc.

15. A/T Learning (Supports 14 Brands)

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.

16. EGR Adaption(Supports 10 Brands)

This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.

17. Language Change(Supports 22 Brands)

This function is used to change the system language of the vehicle central control panel.

18. A/F Reset (Supports 5 Brands)

This function is applied to set or learn Air/ Fuel ratio parameters.

19. Coolant Bleeding ( Supports 5 Brands )

Use this function to activate the electronic water pump before venting the cooling system.

20. NOx Sensor Reset (Supports 12 Brands)

NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalyticconverter learned value stored in the engine ECu.

21. Seats Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

22. Stop/Start Reset(Supports 5 Brands)

This function is used to open or close the automatic start-stop function via setting the hidden function inECU(provided that the vehicle has a hidden function and supported by hardware).

23. Transport Mode(Supports 13 Brands)

ln order to reduce power consumption, the following functions may be disabled,including limiting thevehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At thistime, the transport mode needs to be deactivated to restore the vehicle to normal.

24. Tyre Reset(Support 13 Brands)

This function is used to set the size parameters of the modified or replaced tire.

25. Windows Calibration(Supports 24 Brands)

This feature is designed to perform door window matching to recover ECU initial memory, and recover theautomatic ascending and descending function of power window.

26. AdBlue Rest(Diesel Engine Exhaust Gas Filter) – (Supports 8 Brands)

After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required.

27. ODO Reset (Supports 10 Brands)

a) ODo reset is to copy, write, or rewrite the value of kilometers in the chip of odometer by using a cardiagnostic computer and data cable, so that the odometer shows the actual mileage.

b) Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance.

28. Airbag Reset(Supports 12 Brands)

This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator lights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable,it is required that all new accessories must be replaced, but after performing this function, the data of theairbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and the airbag computer can continue to use.

More updates in progress

 Support 18 different languages,English, French, German, Italian, Spanish, Portuguese, Japanese, Russian, Polish, Türkiye, Dutch, Sweden, Hungarian, Slovakia, Greek, Chinese Traditional, Arabic, Korean,you can switch langyage feely ,and 97+ car brands , for more persons to use